 |
||
|
|
 |
|
WEB SPECIAL! SAVE $5. With Aluminum Head. Our Miter Gauge features a full 60º travel both left and right with adjustable positive stops at both 90º and 45º. The 3/4" x 3/8" x 18" steel miter bar securely locks into a miter T-slot or will fit standard miter slots. Miter Gauge #1725 ......................................SALE $29.95 
|
||
|
||
|
|
 |
|
Useful and accurate when making crosscuts or routing end grain on table saws. Squeezing the pistol grip engages a downward pressure clamp, securing your stock firmly in place. Fits any standard 3/4" x 3/8" miter slot. The positive adjustable stops at 90º and 45º, left and right, are useful for both left and right tilt table saws. Includes adjustable stop block, great for repetitive length cuts. 4" Maximum stock thickness. Bar extends to 12". Clamping Miter Gauge #9456 ......................................SALE $49.95
|
||
|
||
|
|
 |
|
Convenient metal T-track clamps work on any t-track that accepts a 1/4" or 5/16" hex head bolt. The T-shaped base and 1" round brass hold down will secure stock from 1/4" to 2" thick against your table, or use on jigs that have a T-track. Use on a drill press table to secure the work piece. Can also be used on a drill press or router table fence to mount stop blocks onto the T-track in the fence face. Sold as a pair. #9441 Reg. $34.95 ...................SALE $29.95 |
||
|
|
|
||||||||
|
|
 |
||||||||
|
WEB SPECIAL! SAVE $5 for #1702! Works with standard 3/4" x 3/8" miter gauges with or without a T-slot. Our track is great for shop built router tables that are not equipped to handle a miter gauge. You can add a miter or sliding fixture to anything that can be routed out to fit the Miter T-Track work bench, table saw extensions, drill press tables, and band saw tables. The miter T-bar slides into the miter track or miter slot in your table saw. The T-bar can be used to make sliding jigs and other fixtures throughout the shop. Add a lock down knob by drilling and tapping the T-bar, there is no end to the possibilities. Use #7785 (1-1/4" Straight bit) to make the groove for the Miter T-Track. T-Track length may vary up to 1/8". Miter T-Track and T-Bar A 32" #9871 Miter T-Track ...........................SALE $16.95 A 48" #1702 Miter T-Track ...........................SALE $19.95 B 32" #9872 Miter T-Bar ...............................SALE $16.95
|
||||||||||
|
|
|
|
|
 |
|
Our combo T-Track/Miter T-Track lets you use your miter gauge or tenoning jig, plus T-Track accessories on your router table, band saw table or table saw extension. The T-Track accepts any accessory that uses a 1/4" hex head bolt, such as featherboards, stop blocks or hold downs. The Miter track accepts a standard 3/4" x 3/8" bar or sliding T-Bar. 32" length may vary up to 1/8". 32" Combo T-Track/Miter T-Track #9859.....................................................SALE $24.95 |
|
|
|
|
|
 |
|
Create custom jigs and fixtures with our Miter T-Track slot locking kit. Lock all types of featherboards onto table saws, router tables and band saws. The T-bar will fit any 3/4" x 3/8" miter T-slot groove. Instructions are included for attaching to a featherboard or making a circle cutter for your router. Includes: 2 pcs Aluminum T-nuts (1-stop, 1-pivot)  • 2 pcs 1/4"Flat Head Screws • 2 pcs 1/4" Triangle thru Knobs • 1 pc 1/4" Set Screw (1/4" hex) • 2 pcs 1/4" Washers • 1 pc 1/8" Allen Key • 1 pc plastic Spacer • 1 pc 4x20mm self-tapping Screw Miter T-Track Accessory Kit #9870 Miter T-Track & T-Bar Accessory Kit.............$9.95 |
|
||
|
|
 |
The perfect accessory kit for attaching featherboard, hold-downs or virtually any type of jig you can think of to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot. The fixture kit works by applying outward pressure to the "walls" of the miter gauge slot. The "wedge" bolts push up into center counter sunk holes in the miter bar as they tighten with the star knobs, which pushes the center of the miter bar outward producing a nice tight fit. The Fixture Kit includes: • 2 ea. expandable 4-3/4" long miter bars • 2 ea. star knobs • 2 ea. wedge bolts • 2 ea. washers • can be used with stock up to 1-1/4" thick Miter Slot Fixture Locking Kit #2233 .................................................... $9.95 |
||
Questions? Call Toll Free: 1-800-533-9298 
